Coffee Machine Heater

Also known Triangle Flange Immersion Heater

Triangle flange Immersion heaters has long been recognized as the most versatile and widely used source of electric, commercial, industrial, scientific and domestic heat. immersion heaters are used for a number of applications which include fluids, including water, oils, chemicals and more.

Our industrial immersion heaters are reliable, strong, adaptable and suitable for an unlimited number of applications and environments. Design and manufacturing facilities to meet your particular requirements. whether it’s a large quantity requirement or a special one. depending on the application required, these immersion heaters can be made in various types of materials including incoloy, stainless steel, mild steel, Copper and titanium.

Design & Features

Reliable Heater examines each process to ensure the proper materials are selected. As a standard, Screw Plug immersion heater elements are constructed of incoloy, stainless steel, mild steel, Copper and titanium. Typical flange materials include Carbon Steel and 300 Series Stainless Steels.

Triangle Flange Immersion Heater

Watt Density Selection

Watt densities range from 2 to 60 watts per square inch (.3 to 9.3 watts per square centimeter). Choosing the correct watt density is essential to the life of the heater and the fluid. The fluid’s ability to remove heat from the element will determine the proper watt density.

Control Selection

Watt density and material selection is only part of the decision process. Properly selecting the control method is as critical as watt density and material selection.

Standard Screw Plug Heater

• Four Standard Screw Plug Sizes—1″, 1-1/4″, 2″, 2-1/2″
• Recompacted element bends restore insulation resistance after forming
• Corrosion-Resistant electrical wiring hardware
• Silicone resin element seal standard
• Special sheath materials available
• Special straight bulkhead or European thread fittings available

Coffee Machine Heater

Material Selection

SHEATH MATERIALS

Incoloy 800

Nickel 30-35%, Chromium 19-23%, Iron balance.

The high nickel content of this alloy contributes to its resistance to scaling and corrosion. Used in air heating and immersion

heating of potable water and other liquids.

316/316L Stainless Steel

Chromium 16-18%, Nickel 11-14%, Iron balance.

(316L – Low Carbon)

Applications include deionized water. Maximum Sheath Temperature: 1200°F / 649°C

304/304L Stainless Steel

Chromium 18-20%, Nickel 8-11%, Iron balance.

(304L – Low Carbon)

Used in the food industry, medical, and chemical heating.

Maximum Sheath Temperature: 1200°F (649°C)

Copper

Standard Copper Alloy

A low temperature, inexpensive material used mainly for clean water heating.

Maximum Sheath Temperature: 350°F / 177°C

Steel

Low Carbon